bathtub reglazing - why get professionals

Dangers of Low-Quality Tub Refinishing: Why You Should Hire Professionals

You may find several DIY articles and videos online if you do a search. Creators of such stuff have good intentions. In most situations, the processes seem easy to follow if they are outlined in an article or are very straightforward if they are shown in a video.

This may make you feel as if you can accomplish it as well! However, attempting some of the suggestions seen online might cause more harm to your bathtub. The refinishing of your bathtub requires the assistance of an expert. Reasons why:

Exposure to Dangerous Chemicals

Professionals are aware of the importance of having enough ventilation in the bathroom when refinishing bathtubs. Reglazing might expose you to hazardous refinishing chemicals that pose health hazards.

For instance, inhaling methylene chloride used in stripping agents is hazardous. Death may result from exposure to at least 6 ounces of this substance. Methylene chloride has a pleasant odor and a transparent, liquid appearance. Resurfacing professionals use it to remove coatings off bathtubs so that a fresh coat will adhere nicely.

Extremely dangerous is the use of this chemical in your bathroom, especially if it is a tiny, enclosed place with little or no ventilation. Since methylene chloride is a volatile organic chemical that evaporates quicker when poured, rubbed, or sprayed, the fumes of the compound will soon build in confined areas.

Professionals in the field of resurfacing are aware of the dangers associated with volatile substances and so avoid products containing them. Using sophisticated equipment, specialists also guarantee adequate ventilation in a bathroom.

Substandard Bath Safety

Slippery bathtubs are one of the signs of substandard bathtub reglazing. In an effort to save money, you may choose to resurface your bathtub using substandard materials.

If you do not invest in a strong and thick coating, you may end up with a tub that is extremely slippery and may lead to accidents while bathing. Besides, surfaces like these tend to flake, chip, or crack easily after a short period. When you engage a skilled refinishing professional, this issue seldom arises!

Bubbled Surface

Properly refinished tubs are nearly difficult to distinguish from brand new bathtubs. However, not every duty is completed flawlessly. Tub refinishers are not all specialists.

A common issue that arises from an incompetent refinisher’s work is the establishment of bubbles on the tub. The bubbles will appear when air gets trapped between the coating layers. This is because the coating may not be curing as expected. It may also occur when the incompetent refinisher resurfaced the tub without stripping the old coat on the tub.

As mentioned above, a competent refinisher knows that removing the old coat allows the new coat to stick properly. If not, it could result in bubbles on the tub’s surface.

To avoid this issue, ensure you reach out to a reglazing expert who can strip the old coat properly. Also, you’ll need to wait for at least one day before you can use the bathtub. This will allow the newly refinished coating to cure properly. During the 24 hours, ensure the tub doesn’t come into contact with water.

Rough Texture

A perfectly resurfaced tub should be smooth in texture. But, if your resurfaced tub feels rough in touch, it means that the refinishing was done without sanding or cleaning the tub’s surface.

The rough texture could also be a result of debris and dust that got trapped on the surface when it was curing. Besides, it is difficult to prevent dust from getting into your bathroom, so in some cases, dust may stick to the finish when it is curing.

Although it may seem a slight faultiness, it can make you feel uncomfortable when taking a bath, more so if the rough spots are in places that your skin comes in contact with when bathing. If you find it too uncomfortable, give a call to a bathtub resurfacing expert to smooth it out instantly.

Fading & Discoloration

Premature fading is another issue with low-quality resurfacing. This occurs when the ratio of materials used in the refinishing process is incorrect or the coating mixture is too thin. It can also occur when the refinisher uses abrasive cleaners.

You should choose a reputable refinishing firm that employs experts who understand how to correctly mix the right quantities of refinishing products.

Sticky or Tacky Texture

If your tub feels tacky or sticky, it is a sign that the coating has not cured as expected. This happens when the resurfacing materials are not properly mixed or when the coating reacts to a chemical or cleaning agent. Such issues are unlikely to arise when you hire a well-trained and experienced resurfacing professional.